Product catalogue

Black, water-based, two-component coating for sponge rubber automotive seals, including primary seals, trunk lid seals and hood seals. Forms a particle-free finish.

Water-based adhesive used with a compatible hardener to bond flock to EPDM and TPO automotive profiles.

Moisture-cure primer for glass, metals and other polar substrates, with UV fluorescence for checking coating presence and a glass-encapsulation role.

Chemlok 205GB

Rubber Bonding Adhesives

Substrate primer used beneath compatible Chemlok covercoats in rubber-to-metal bonding systems, with one-coat capability for selected NBR compounds.

Solvent-based metal primer used beneath Chemlok covercoats, including the 6000 and 230 series, for rubber-to-metal bonding systems.

Chemlok 213

Polyurethane Bonding Agents

Solvent-based adhesive for castable and RIM polyurethane-to-metal bonding, with selected TPU applications and a Chemlok 219 primer option for environmental resistance.

Chemlok 218GB

Polyurethane Bonding Agents

One-coat adhesive for castable and millable polyurethane bonded to metal and other rigid substrates, with a Chemlok 219 primer option for castable urethane systems.

Chemlok 219

Polyurethane Bonding Agents

Solvent-based adhesive for castable polyurethane and selected TPU-to-metal applications, used as a one-coat adhesive or as a primer beneath Chemlok 213.

Chemlok 220LFGB

Rubber Bonding Adhesives

General-purpose covercoat for two-coat rubber bonding systems, used as the adhesive layer over a primer.

Solvent-based rubber bonding adhesive used over Chemlok 205 primer for selected elastomers, including CPE, CSM, epichlorohydrin rubber and natural rubber.

Solvent-based covercoat used over Chemlok 205 primer for bonding rubber to metal and other rigid substrates.

Covercoat adhesive for butyl, EPDM and other elastomers, used in rubber-to-rubber bonding or over Chemlok 205-primed rigid substrates.

Chemlok 238(NW)GB

Rubber Bonding Adhesives

Solvent-based covercoat for butyl and EPDM bonding, including rubber-to-rubber applications and bonding to metals primed with Chemlok 205GB.

Chemlok 259 is a green-black, general-purpose adhesive for rubber-to-substrate bonding.

Chemlok 402X

Rubber Bonding Adhesives

Solvent-based treatment for bonding textiles to unvulcanized rubber in hoses, belts, diaphragms and other textile-reinforced rubber products.

Two-component adhesive system for bonding thermoplastic elastomers to metal, glass, plastics and other elastomers during injection molding.

Two-component system combining Chemlok 489 resin and Chemlok 456 curative to bond PVC to prepared metals, glass and plastics during injection molding.

One-coat treatment for bonding vulcanized medium-high-acrylonitrile NBR to itself or metal, with an additional aluminum-to-nylon resin application.

Chemlok 607

Rubber Bonding Adhesives

One-coat adhesive for bonding unvulcanized silicone rubber in peroxide-cured systems to metal, glass, plastic and textiles, with selected specialty elastomer applications.

Chemlok 608

Rubber Bonding Adhesives

One-coat adhesive for bonding unvulcanized silicone elastomers to metal and other rigid substrates using a peroxide cure system.

Black, general-purpose covercoat adhesive used over a compatible primer in two-coat rubber bonding systems.

Solvent-based treatment for bonding uncured fluoroelastomers (FKM) to metal.

Solvent-based rubber-to-metal adhesive used as a one-coat system or over Chemlok 205 or 207 primer, with different film-thickness requirements for each system.

Solvent-based covercoat for rubber-to-metal bonding during vulcanization, used with Chemlok 205GB or 207GB primer. Provides resistance to salt spray.

Chemlok 6108GB

Rubber Bonding Adhesives

Rubber-to-metal covercoat that cures during vulcanization, normally used over Chemlok 205GB or 207GB primer. Its solvent system is non-chlorinated.

Chemlok 6125GB

Rubber Bonding Adhesives

Rubber-to-metal covercoat used with Chemlok 205GB primer, with resistance to heat, water and salt spray and a smooth, continuous film.

Chemlok 6150GB

Rubber Bonding Adhesives

Rubber bonding adhesive with a non-chlorinated solvent system, used as a single coat or as a covercoat in a two-coat bonding system.

General-purpose covercoat for two-coat rubber bonding systems, with EPDM and IIR outside its general-purpose application range.

One-coat rubber-to-metal adhesive that can also be applied over Chemlok 205 or 207 primer for demanding environmental exposure.

Chemlok 6253GB

Rubber Bonding Adhesives

One-coat rubber bonding adhesive that can also be used over Chemlok 205GB or 207GB primer for demanding environmental conditions.

Versatile rubber-to-metal covercoat for a wide elastomer range, normally used over Chemlok 205GB or 207GB and suitable for selected one-coat applications.

Adhesive for bonding HNBR and NBR compounds to metal for high-temperature service, used as a one-coat adhesive or as a covercoat over a compatible primer.

Chemlok 7701

Bonding Surface Treatments

Solvent-based treatment for cured rubber and selected thermoplastic polymers, used with compatible LORD adhesives to improve surface receptivity before bonding.

One-coat, water-based adhesive for bonding peroxide-cured elastomers to zinc-phosphatized steel and other rigid substrates during vulcanization.

One-coat bonding treatment for uncured silicone rubber and selected specialty elastomers on metal, glass, plastics and textiles.

Chemlok BM-1

Rubber Bonding Adhesives

Solvent-based adhesive for bonding nitrile rubber to metal during vulcanization, with application by brush, dip or roll coating.

Red liquid, one-coat adhesive for selected peroxide-curing elastomers, including silicone rubber.

Flocklok 852F

Flocking Adhesives

Single-coat flock adhesive for bonding polyester or nylon flock to SBR, CR, NBR, and EPDM substrates in on-line or off-line production.

Water-based mold release agent for rubber anti-vibration components, recommended for spray application without dilution.

Solvent-dispersed, semi-permanent release coating for synthetic rubber molding, particularly peroxide-cured elastomers. Not for silicone rubber.

Aqueous fluorine-compound release agent for rubber molding, particularly fluororubber, and for thermosetting and thermoplastic resins. Used without dilution.

Aqueous fluoropolymer release agent that forms a dry, colorless film for rubber injection, transfer and compression molding.

Water-dilutable release agent for conveyor belts and flat belts, with applications in natural rubber, EPDM, SBR, BR and IIR molding.

Water-based, semi-permanent release and lubricating agent applied to rubber curing bladders for tire and air spring production.

Single-component HNBR coatings for elastomer surfaces: black HPC-5B and clear, tintable HPC-5C, with fluid and ozone resistance.

Single-component surface treatment that promotes bonding of thermoplastic materials to metals and other rigid substrates during injection molding.

Single-component surface treatment for bonding addition-cured silicone rubber to metals and compatible plastics during injection or compression molding.

Gray, single-component thermosetting phenolic coating for magnet protection, applied by spray or dip.

Thermosetting phenolic coating designed for thin-film corrosion and moisture protection of magnets.

LORD JMC-500ST

Adhesive & Coating Additives

Coating thinner and cleaner used to thin LORD JMC-500K magnet coating.

LORD JMC-502K

Magnet Coatings

Phenolic coating for magnet protection, including neodymium-iron-boron magnets used in direct-drive permanent-magnet wind generators.

LORD JMC-700K

Magnet Coatings

Black, thermal-cure epoxy coating for corrosion and moisture protection and electrical insulation of magnets.

LORD JMC-700ST

Adhesive & Coating Additives

Thinner for spray application of LORD JMC-700K coating, helping produce a smooth film after spraying and heat curing.

Solvent-based adhesive for bonding fluorocarbon rubber to metal and other rigid substrates, with applications in polyimide cable insulation bonding.

Solvent-based, one-coat bonding adhesive for peroxide-cured fluorocarbon rubber (FKM).

Solvent-based covercoat for bonding rubber compounds to metal and plastic substrates during vulcanization, normally used over Chemlok 205 or 207 primer.

Water-based, single-component coating for EPDM and sponge rubber automotive weatherstrips. Forms a textured, low-friction surface and is suitable for in-line application or off-line use with a thickener.

Water-based, single-component coating with a micro-textured, low-friction surface for EPDM and sponge rubber automotive weatherstrips, including sunroof seals.

Black, water-based, single-component coating for in-line application on EPDM and sponge rubber automotive weatherstrips. Forms a smooth, particle-free, low-friction finish.

Water-based, single-component coating for in-line application on EPDM and sponge rubber automotive weatherstrips, forming a smooth, low-friction surface.

Water-based, two-component anti-friction coating used with Sipiol WV 21 F curative for off-line automotive sealing-system production.

Water-based automotive weatherstrip coating for off-line application. Requires Sipiol WV 21 F curative to form a two-component system with a textured, abrasion-resistant, low-friction finish.

Two-component, solvent-based adhesive system mixed in equal volumes for castable and thermoplastic polyurethane bonding, used alone or as a primer beneath specified THIXON covercoats.

One-component adhesive for castable polyurethane-to-metal bonding in applications with heat and humidity resistance requirements.

THIXON 520-PEF-C

Rubber Bonding Adhesives

Solvent-based covercoat used with a compatible MEGUM or THIXON primer to bond rubber to metal and other rigid substrates during vulcanization.

Solvent-based, one-coat adhesive for rubber-to-metal bonding, with additional uses for rubber-to-synthetic-fiber bonding and heat-and-pressure bonding of vulcanized rubber.

Solvent-based primer for rubber bonding systems using compatible MEGUM or THIXON covercoats, including THIXON OSN-3-EF-V and MEGUM 538.

THIXON P-11-EF-C

Rubber Bonding Adhesives

Solvent-based primer for use with compatible MEGUM or THIXON covercoats, with a one-coat option for selected polar rubbers including NBR, HNBR and ACM.

Solvent-based, one-coat surface treatment for bonding NBR, ACM, ECO and millable polyurethane rubber to metal or other rigid substrates during vulcanization.